NOVEM - Noise and Vibration Emerging Methods

8:00 - 16:00 (8h)

NOVEM2025, On-site Registration and Presentation Upload, NOVEM Office: 08:00 - 14:00

On-site Registration and Presentation Upload

9:30 - 10:30 (1h)

Noise and Vibration Control

Room1

› A Comparison of Actuation Strategies in a Combined Active-Passive Absorption Control System - Charalampos Nikolaou, Jordan Cheer, Felix Langfeldt 09:30-09:45 (15min)

› A Sensitivity Study Approach to Improve the Sound Transmission Loss Performance of Vibro-acoustic Metamaterials with Embedded Helmholtz Resonators - Kenneth Leung, Institute of Sound and Vibration Research 09:45-10:00 (15min)

› Optimisation of a controllable Helmholtz resonator to achieve high frequency reconfigurability with large absorption values - Yuan Kit Sim, Institute of Sound and Vibration Research, University of Southampton 10:00-10:15 (15min)

› Optimized Selection of Passive Metamaterials for Noise Control: A Benchmark Study - Mert Dogu, Technical University of Munich, Chair of Vibroacoustics of Vehicles and Machines 10:15-10:30 (15min)

9:30 - 10:30 (1h)

Developments in Vibroacoustics

Room2

› Analysis of structural vibration transmission across periodic junctions with area couplings - Stijn Moons, Department of Civil Engineering [KU Leuven] 09:30-09:45 (15min)

› Diffuse Field Reciprocity Relations for Components with Multiple Wave-types with Application to Mid-frequency Vibration Analysis - Robin Langley, University of Cambridge 09:45-10:00 (15min)

› The use of AAA rational approximation algorithm for time-domain vibroacoustic model order reduction - Shaposhnikov Kirill, COMSOL A/S 10:00-10:15 (15min)

› Efficient low-rank MOR of complex vibroacoustic benchmark problems for aircraft cabin noise assessment - Yannik Hüpel, Institute for Acoustics and Dynamics, TU Braunschweig 10:15-10:30 (15min)

9:30 - 10:30 (1h)

Engineered Materials

Room3

› Tunable meta-sandwich via weak connection with steady mechanical properties and reconfigurability - Zengshen Yue, The Hong Kong Polytechnic University [Hong Kong], Xián Jiaotong University 09:30-09:45 (15min)

› Numerical and Experimental Studies on the Absorption of Additive-Manufactured Helmholtz Resonators with Permeable Properties - Korbinian Schwab, Technical University of Munich, Germany; TUM School of Engineering and Design, Department of Civil and Environmental Engineering, Chair of Building Physics 09:45-10:00 (15min)

› Gradient Fibro-Porous Materials for Tailored Sound Absorption - William Johnston, Michigan Technological University - Bhisham Sharma, Michigan Technological University 10:00-10:15 (15min)

› State of the art of damping enhancing technologies for carbon fibre-reinforced polymers with bio-based resin system - Stefan Schoder, Institute of Fundamentals and Theory in Electrical Eng., Division Vibro- and Aeroacoustics, Graz University of Technology, Austria 10:15-10:30 (15min)

10:30 - 11:00 (30min)

Coffee Break @ Foyer

Room1

10:30 - 11:00 (30min)

Coffee Break @ Foyer

Room2

10:30 - 11:00 (30min)

Coffee Break @ Foyer

Room3

11:00 - 13:00 (2h)

Keynote Forum 3

Room1

Title: Vibroacoustics of space vehicles, Chair: Stephen Hambric

11:00 - 11:30 (30min)

Aeroacoustics of Space Launchers at Lift-off

Room1

Christophe Bailly

11:30 - 12:00 (30min)

Vibroacoustic Environment of Spacecraft at Launch – An Overview and the Challenge

Room1

Ivan Ngan

12:00 - 12:30 (30min)

From Rockers to Rockets: The DFAT® Revolution in Acoustic Testing

Room1

Alessandro Carrella

12:30 - 13:00 (30min)

Panel Discussion

Room1

Forum Speakers

13:00 - 14:00 (1h)

Lunch @ Foyer

Room1

13:00 - 14:00 (1h)

Lunch @ Foyer

Room2

13:00 - 14:00 (1h)

Lunch @ Foyer

Room3

14:00 - 15:00 (1h)

Noise and Vibration Control

Room1

› Shape optimisation of a plate-type acoustic metamaterial to achieve broadband noise reduction using Bayesian optimisation - Jaeho Cho, Institute of Sound and Vibration Research 14:00-14:15 (15min)

› Water-based technique for natural frequency variation - Omar D. Mohammed, Prince Mohammad Bin Fahd University - Hala Alherz, Prince Mohammad Bin Fahd University 14:15-14:30 (15min)

› De-icing aeronautical structures using vibrations - Marc Budinger, Institut national Des Sciences Appliquées de Toulouse 14:30-14:45 (15min)

› Analysis the soft landing response of lauch vehicle on a barge - Ishan Nargolkar, Indian Institute of Technology Kharagpur - Kiran Vijayan, Indian Institute of Technology Kharagpur 14:45-15:00 (15min)

14:00 - 15:00 (1h)

Developments in Vibroacoustics

Room2

› Structural intensity assessment of experimental structural response data from aircraft structures - Sebastian Florens Zettel, Institute of Aeroelasticity, German Aerospace Center 14:00-14:15 (15min)

› Vibro acoustic characterization of aerospace structures made of Miura-Ori origami metamaterial - Vasilena Petrova Kraleva, Polytechnic University of Bari / Politecnico di Bari 14:15-14:30 (15min)

› Designing and optimizing fairing acoustic protections by means of CAE tools and measurements - Rainer Stelzer, Beyond Gravity Schweiz AG 14:30-14:45 (15min)

› Structural Design of the SPICE X-ray Detector for Space Application - Jonas Muegge 14:45-15:00 (15min)

14:00 - 15:00 (1h)

Engineered Materials

Room3

› Time-dependent Numerical Simulation of a Quantum-like Tunnelling Effect in a Non-Hermitian Active Acoustic Metamaterial - Felix Langfeldt, Institute of Sound and Vibration Research, University of Southampton 14:00-14:15 (15min)

› A quantum graph approach to metamaterial design - Gregor Tanner, University of Nottingham 14:15-14:30 (15min)

› Application of Voting Method for Acoustic Analysis of Lattice Structures - Tao Yang, Technical University of Munich, Chair of Vibroacoustics of Vehicles and Machines 14:30-14:45 (15min)

› Design and validation of metamaterials with multi-modal rotational resonators for broadband vibroacoustic attenuation in orthotropic panels - Daniele Giannini, KU Leuven, Department of Civil Engineering, Kasteelpark Arenberg 40, 3001 Leuven 14:45-15:00 (15min)

15:00 - 15:30 (30min)

Closing

Room1

Organizing Committee

15:00 - 15:30 (30min)

Closing Ceremony

Room1

Organizing Committee

15:30 - 16:00 (30min)

Closing Reception @ Foyer

Room1

15:30 - 16:00 (30min)

Closing Reception @ Foyer

Room2

15:30 - 16:00 (30min)

Closing Reception @ Foyer

Room3

Program